Cummins KTA50-G3 Generators
Products
Contact Us
info@twinpower.cc
+86 18475398655
Cummins KTA50-G3 Generators
Category:
Power:
Rating type:
Type:
4 cycle, 60 ° Vee, 16 cylinder diesel
Application:
Packing Size:
3275x2000x2200mm
Weight:
5900
HS Code:
Technical Specification of Cummins KTA50-G3 Generators
Engine Model
KTA50-G3
Fuel System
Cummins PT™ direct injection
Rated Power
Peak Engine Torque
Rated Speed
Compression Ratio
13.9:1
Rating Type
Fuel Consumption at Rated Speed
Bore
159mm [6.25 in]
Cooling system
50° C ambient radiato
Stroke
159mm [6.25 in]
Firing Order
Aspriration
Dry Weight
5560kg
Displacement
3067in3(50.3L)
Emission
General Information of Cummins KTA50-G3 Generators
Description of Cummins KTA50 G3 Generator Engine
- Dual Frequency to Meet Diverse Energy Needs
- Cummins KTA50-G3 Diesel Engine is both 50and 60 Hz capable, with a wide voltage rangefor Continuous, Prime or Standby applications in commercial, residential, industrial, utilities, and more. It is widely acknowledged as the most robust and cost effective diesel engine in its power range for the generator set market.
- An Engine That Works Harder, Longer
- Cummins KTA50 G3 generator is recognized forperformance, reliability and durability worldwide. With its very high derating threshold fortemperatures, altitudes and humidity, KTA50-G3 Industrial Engine ranks among the top performers inthe harshest operating environments.
- A Unit That Stays Cool, In The Hottest Places on Earth
- The cooling system is engineered to meet Limiting Ambient Temperature (LAT) up to 50°C at Continuous rating. Designed with vertical hot air discharge, the KTA50 G3 series engine is suitable for multiple set installations.
Our Engegy Working for You
Engine Performance Ratings
| Parameter | 50 Hz (1500 rpm) | 60 Hz (1800 rpm) |
|---|---|---|
| Gross Engine Output | ||
| Standby | 1227 kWm / 1645 BHP | 1380 kWm / 1850 BHP |
| Prime | 1097 kWm / 1470 BHP | 1220 kWm / 1635 BHP |
| Base (Continuous) | 900 kWm / 1206 BHP | 1000 kWm / 1340 BHP |
| Net Engine Output | ||
| Standby | 1192 kWm / 1598 BHP | 1328 kWm / 1781 BHP |
| Prime | 1074 kWm / 1440 BHP | 1182 kWm / 1585 BHP |
| Base (Continuous) | 877 kWm / 1176 BHP | 962 kWm / 1290 BHP |
| Typical Generator Set Output | ||
| Standby (ESP) | 1120 kWe / 1400 kVA | 1250 kWe / 1610 kVA |
| Prime (PRP) | 1020 kWe / 1275 kVA | 1135 kWe / 1418 kVA |
| Base Load (COP) | 842 kWe / 1052 kVA | 924 kWe / 1154 kVA |
General Engine Data
- Fuel Rating: FR6250 (Standby) FR6120 (Prime)
- Type: 4 cycle, 60-degree Vee, turbocharged, Low-temp aftercooled
- Bore x Stroke: 159 mm (6.25 in) x 159 mm (6.25 in)
- Displacement: 50.3 litre (3067 in.3)
- Cylinder block: 16 cylinder
- Compression Ratio: 13.9 : 1
- Battery charging alternator: 35 amps
- Starting: voltage 24-volt, negative ground
- Standard cooling system: 50° C ambient radiato
- Fuel system: Cummins PT™ direct injection
- Fuel filter: Dual spin-on paper element fuel filters with standard water separator
- Lube oil filter type(s): Spin-on full flow filter
- Lube oil capacity (L): 177
- Flywheel dimensions: SAE 0
Features
- Integrated Design: Products are supplied complete with cooling package and air cleaner kit for a complete powerpackage. Each component has been specifically developed and rigorously tested for G-Drive products, ensuring highperformance, durability and reliability.
- Aftercooler: Large capacity integral aftercoolers are supplied with cooling water separate from the engine jacket. This provides cooler, denser intake air for more complete combustion and reduced engine stresses for
longer life and low exhaust emissions. - Cooling System: Gear driven centrifugal water pump, two loop system must be employed, namely the engine jacket is cooled by one radiator or heat exchanger and the aftercoolers are cooled by a separate radiator or heat exchanger.
- Pistons: Pistons are dual Ni-resist, aluminium alloy, cam ground and barrel shaped to compensate for thermal expansion assures precise fit at operating temperatures. Grooved skirt finish provides superior lubrication. Oil cooled for rapid heat dissipation.
Applications
Cummins KTA50-G3 Generator Drive Engine is well-suited for a variety of applications, including:
- Commercial Vessels: Tugboats, fishing vessels, cargo ships, and passenger vessels.
- Workboats: Dredgers, supply boats, and other workboats that require high power and reliability.
- Offshore Platforms: Oil rigs, drilling platforms, and other offshore applications.
- Harbor Craft: Ferries, barges, and other harbor craft.
- Military Vessels: Patrol boats, support vessels, and other military applications.
